Our customer chose the Envirosun HP Plus Heat Pump after considerable research and careful consideration.  A large system was not required and 200L was deemed adequate and more than enough for the requirements.

This installation was in a perfect location, ground support and access was ideal, we did install the system on a new concrete slab to avoid water pooling around the base.  

A feature of the Envirosun HP Plus range is they come standard with a 10amp normal power plug and lead so they can be plugged straight into an external power point.  This is ideal if you already have one on site, which is standard for anyone who has a modern gas continuous flow system.

The Envirosun HP Plus heats the water in standard mode to 65°C, then if a higher temperature is selected, the element is used for the top up.  This feature is handy for when the family stays over and you need an extra volume.  

For added safety and peace of mind, a tempering valve has been installed to regulate the  hot water to  a maximum temperature of 50°C — helping to reduce the risk of scalding while maintaining comfort.  

We have chosen the Envirosun HP Plus heat pump range as one of our Standard Systems due to the fact it is sold, distributed and serviced by Energie Group, an Australian owned business that has been involved in the industry since the 1990’s.   The Envirosun HP Plus is an imported product manufactured by Haier, you may know them as Fisher & Paykel.  Haier also are the manufacturers of Haier and Wulfe heat pumps.

Contact The Hot Water Man for a quote on an Envirosun HP Plus 200L or 330L heat pump and let us arrange a trouble free installation for you.