Changeover specials
Our hot water storage changeover offers are available for a limited time only.
Priced from
$1400.00
Rinnai B26
Incl. GST.
1. Rinnai B26 Continuous Flow Changeover
Replace any non solar 24-26L gas continuous flow water heater
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new Rinnai B26 Gas Hot Water System (Natural Gas).
- Subject to availability.
- Changeover of an existing same size external gas 24-26 L non solar continuous flow hot water system in same location without water controllers.
- Connection to hot, cold and gas points at the same location.
- Assumes use of existing compliant external weatherproof powerpoint.
- Assumes use of existing isolation valves.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable on ground floor.
- Assumes existing gas and water supplies are adequate.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.
Priced from
$1980.00
Aquamax G270SS
Incl. GST.
2. AquaMAX G270SS Changeover
AQUAMAX G270SS Stainless Steel Gas Storage Changeover
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new AquaMAX G270SS Hot Water System (Natural Gas).
- Subject to availability.
- Changeover of existing external hot water system in same location.
- Connection to hot, cold and gas points at the same location.
- Use of existing concrete slab.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable for a delivery person with trolley and no lifting is required.
- Assumes unit is installed on the ground and not recessed into the side of the house.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.
Priced from
$1650.00
Vulcan Freeloader
Incl. GST.
3. Vulcan Freeloader Changeover
Ideal replacement for Rheem / Vulcan / Dux 135L
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new Vulcan Freeloader 135LÂ Hot Water System (Natural Gas)
- Subject to availability.
- Changeover of existing external hot water system in same location.
- Connection to hot, cold and gas points at the same location.
- Use of existing concrete slab.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable for a delivery person with trolley and no lifting is required.
- Assumes unit is installed on the ground and not recessed into the side of the house.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.
Priced from
$1400.00
Out of pocket cost after rebate
Incl. GST.
4. Solar to Continuous Flow
Gas Boosted Continuous Flow Solar to Rheem Metro 20 Gas Continuous Flow
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new Rheem Metro 20 (50°C) Gas Hot Water System (Natural Gas). Rheem Metro 26 (50°C) or Rinnai model B20/B26 (50°C) available for a minor additional charge.
- * Total cost of job $1900.00 inc GST, however after AGN rebate your payment to us is $1400.00 inc GST.
- Suitable for single temperature 50°C homes.
- Subject to availability.
- Changeover of an existing same size 18 – 20 Litre external gas solar continuous flow hot water system in same location without water controllers.
- Disconnection of water solar panels at ground level at tank location. Removal of water solar panels on roof can be arranged at an additional cost. This can be quoted separately.
- Connection to hot, cold and gas points at the same location.
- Assumes use of existing compliant external weatherproof powerpoint.
- Assumes use of existing gas isolation valves.
- Includes new water isolation valve.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable on ground floor.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.
Priced from
$1900.00
Rheem Metro 20
Incl. GST.
5. Gas Storage to Continuous Flow
Gas Storage to Rheem Metro 20 Gas Continuous Flow
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new Rheem Metro 20 (50°C) Gas Hot Water System (Natural Gas). Rheem Metro 26 (50°C) and Rinnai model. B20/B26 (50°C) available for a minor additional charge.
- Suitable for single temperature 50°C homes.
- Subject to availability.
- Changeover of an existing. external gas storage hot water system in same location.
- Connection to hot, cold and gas points at the same location: Includes allowance to run 3m x 20mm copper gas line upgrade.
- We recommend calling us for a free quote for longer gas lines.
- Assumes use of existing compliant external. weatherproof powerpoint. If one is not present we can arrange an electrician to install one at an additional cost, normally around $250.00 inc GST.
- Includes new water and gas isolation valves.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable on ground floor.
- Assumes existing gas and water supplies are adequate.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.
Priced from
$1900.00
Vulcan DuoMax
Incl. GST.
6. Vulcan Duomax (By Rheem)
250L Single 3.6kW External Electric HWS Changeover.
Includes
- Supply and installation of new unit
- Decommissioning, draining & removal of the old unit
- Commissioning of new unit
- Certificate of Compliance
T&C's (Install Requirements)
- Supply of new Vulcan 250L, 3.6 kW single element electric storage hot water system (changeover installation).
- Changeover of existing external same size single element 3.6kW electric hot water system in same location:
- (e.g. Aquamax / Rinnai / Rheem / Dux / Vulcan / Everhot).
- Connection to hot, cold pipes at the same location.
- Additional minor pipework changes after isolation valves if required.
- Assumes use of existing isolation valves.
- Assumes existing HWS installation is compliant to current plumbing codes.
- Assumes access to the existing unit is reasonable on ground floor and external.
- Assumes existing water and power supplies are adequate and compliant.
- Licensed electrician will connect electrical components.
Note: Includes suburbs listed in our coverage area as found on our website. Subject to site inspection. Normal working hours only.